View Full Version : pm evolution devices
BLADE_EDGE
Jan 26, 2009, 11:21 AM
80th time ive had a question about this crap i have a sriking bot lvl 15 battle and i got a pm evolution 422 and it wont let me feed it to it, really stupid yes.
Dhylec
Jan 26, 2009, 11:37 AM
Those devices work on a couple of conditions:
1. For normal PM devices, you can only use on the same series. Say, your initial PM is 440, you can use PM device 420 to 424 without bothering w/battle stat.
2. For Ex devices, you can bypass the series restriction by leveling up B Stat to at least 15.
Smidge204
Jan 26, 2009, 11:38 AM
What's your PM's current model number?
=Smidge=
BLADE_EDGE
Jan 26, 2009, 11:46 AM
i think 410
Smidge204
Jan 26, 2009, 11:55 AM
If your current model is 410 you need to use an EX device GH422. You can not use the normal PM device GH422 to evolve your PM.
=Smidge=
BLADE_EDGE
Jan 26, 2009, 12:01 PM
ok thanks
one more question can ex devices transfer a striking bot to technic or range?
Smidge204
Jan 26, 2009, 12:34 PM
Not sure what you're asking, but...
An EX device can convert *any* PM model to change its appearance and behavior in battle.
However, the production stat - what you had to increase to 80+ to evolve it - can only be changed by resetting the PM to its original state and re-feeding it. There is no way to convert a PM with, say, a 100 Production Stat for Striking into a PM with a 100 Production Stat for Ranged without starting over from scratch.
=Smidge=
SabZero
Jan 26, 2009, 01:46 PM
Any PM device only affects the model of the PM, not its synthing stats. Note that EX devices need the PM to have a minimum certain battle status (BSt).
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.