Here's a Guide to get XBCD rumble on 360 controller on PSU

[xenokai]

after messing with it so much i found out how to get it working...

first off DO NO USE THE XBCD FULL INSTALL! this kills the rumble support you must use this...

Plug-in the pad

install microsoft original drivers
install XBCD 1.07
install drivers v 0.2.5 by the install.BAT file
upgrade drivers manually as writed in the guide (follow step3 threw step 14)
Go here http://xbcd360guide.50webs.com/download.html Download the (2.Default Xbox 360 Config File with L and R triggers on seperate axises)
Open XBCD 1.07 program
Click the OPEN button, open the config file you just downloaded. click APPLY

Rumble will now work with you xbox 360 controller xD

[Pure-chan]

wow, nice http://www.pso-world.com/images/phpbb/icons/smiles/anime1.gif

[AkiraXxx]

Did anyone scan it to see if its clean?

[AlphaMinotaux]

Those are just XBCD drivers, no virus' lol you could always download it and scan it yourself.

<font size=-1>[ This Message was edited by: AlphaMinotaux on 2006-10-31 14:59 ]</font>

[AkiraXxx]

Its actually a full install not just a driver you pop on your desktop and use.

[AlphaMinotaux]

hmm redcloud is dead atm, where else can i find the drivers. im searching but no luck

[AlphaMinotaux]

i've had these drivers and just about everyone here who has a 360 controller

[AkiraXxx]

Sucks rumble for psu still isnt working.

Also the 1.07 gives illegal op errors when u run it.

<font size=-1>[ This Message was edited by: AkiraXxx on 2006-10-31 16:31 ]</font>

[AlphaMinotaux]

you mean the driver signature is unverified with microsoft. All the good stuff isnt verified by microsoft http://www.pso-world.com/images/phpbb/icons/smiles/icon_razz.gif just hit yes.

[AkiraXxx]

No the XBCDv107 file when u run it to install it its corrupted and gives a bunch of dos errors.

[xenokai]

huh XBCD v1.07 is not curropted it works just put XBCD v1.07 in google and ull find it. Note you may have to clean the older files if you installed before. if anyone needs anyhelp just post.

[AkiraXxx]

ahhh so dont get the one off the site then.

And exactly were did you get XBCD 1.07 from, every site I go to reroutes back to redcloud and his server is gone. So did you JUST do this or is this like 5 months old and you just now decided to post it.

<font size=-1>[ This Message was edited by: AkiraXxx on 2006-10-31 17:21 ]</font>

[AlphaMinotaux]

the drivers have been around a while, he probably just figured out how to fix rumble so he posted it here. its been posted before how to fix just not on these forums.

[AkiraXxx]

Ahhh ok, if its not against tos of this forum it would help if someone posted the xbcd.107, other wise this is useless for people who dont have it now..-_-



<font size=-1>[ This Message was edited by: AkiraXxx on 2006-10-31 17:31 ]</font>

[Diablohead]

Make syre you enable rumble ingame, its default to off.

[AkiraXxx]

Yeah its on, still doesnt work though. Found the 107, uninstalled all the controller configs and drivers, still doesnt work right. Moves around fine, but theres no rumble. The rumble does work when I test it though, just not in game.

[xenokai]

you may have to delete the old file that the other install left try this.....

uninstall XBCD and delete the install folder from program files then hit Start then search you hardrive for xbcd. you should see some xbcd.dll type files (i deleted xbcdif.dll, xbcdr.dll, xbcdsu.dll)

After you do that run the orginal microsoft xbox 360 controller driver to make sure its installed right. Then reboot the PC. Then follow the step i have posted after the install MS driver. This should work since its EXACTLY what i did.

[AlphaMinotaux]

redclouds server is back up just for those who wanted to fix thier rumble

[LeoDeSol]

Does this make the L and R triggers work too? Mine do not work when using the 360 controller with my PC, but I would love to have 2 more buttons :/

[sonic_ray]

Where's the v0.2.5 drivers install.bat file?

[AlphaMinotaux]

to be honest i dont know how the OP did this but heres what i did.

BTW i tried doing it like described but i gave up and did my own way.

1. uninstall all previous XBCD drivers and reinstall the default microsoft drivers.
2. install this file right here http://redcl0ud.com/files/XBCDv107.exe install it but do not update the microsoft drivers yet.
3. download and install this http://xbcd360guide.myboard.info/driverftp/XBCD360XP.exe this here is the update for the xbcd drivers you just installed. this will make the triggers as buttons so they can be assigned to anything and brings back the rumble.
4. now this is where you update your microsoft drivers with the ones you just installed.
5. Now just follow steps 3-14.
6. all thats left is to go into the PSU game itself and in the options turn on the Vibration, also make sure the "controller" option is set to contrller and not keyboard.

All the files here are safe to those who are sceptical about err... umm.. stuff http://www.pso-world.com/images/phpbb/icons/smiles/icon_razz.gif enjoy your rumble.



<font size=-1>[ This Message was edited by: AlphaMinotaux on 2006-11-04 18:43 ]</font>

[Bipedal]

Not to bring up a dead topic. But I figure it's better than making a new one. I took the above steps, and rumble still didn't work for me =P I've got it all set up in the game, set to controller, and vibration to ON, but still no go. Suggestions? Any other solutions?

[AC9breaker]

I don't know, However I did get the trigger buttons to work for me. That all I needed.