zimmk2vgc
12-07-2006, 05:59 AM
There seems to be something rather odd happening with the graphics settings on PC PSU. There is absolutely no reason why PSU should be barely able to run on my system on the minimum graphics settings. I cannot even get it to run smoothly. Here is the Dxdiag:
------------------
System Information
------------------
Time of this report: 12/7/2006, 11:57:17
Machine name: MERCURY
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: ALiveNF4G-DVI
BIOS: Default System BIOS
Processor: AMD Athlon(tm) 64 Processor 3200+, MMX, 3DNow, ~2.0GHz
Memory: 1024MB RAM
Page File: 319MB used, 2140MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
---------------
Display Devices
---------------
Card name: ASUS Extreme AX300 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x5B60)
DAC type: Internal DAC(400MHz)
Device Key: EnumPCIVEN_1002&DEV_5B60&SUBSYS_00831043&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (70Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6587 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 12/12/2005 03:41:03, 252928 bytes
Any ideas/suggestions would be much appreciated =D
------------------
System Information
------------------
Time of this report: 12/7/2006, 11:57:17
Machine name: MERCURY
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: ALiveNF4G-DVI
BIOS: Default System BIOS
Processor: AMD Athlon(tm) 64 Processor 3200+, MMX, 3DNow, ~2.0GHz
Memory: 1024MB RAM
Page File: 319MB used, 2140MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
---------------
Display Devices
---------------
Card name: ASUS Extreme AX300 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x5B60)
DAC type: Internal DAC(400MHz)
Device Key: EnumPCIVEN_1002&DEV_5B60&SUBSYS_00831043&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (70Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6587 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 12/12/2005 03:41:03, 252928 bytes
Any ideas/suggestions would be much appreciated =D