Tavia
Dec 1, 2002, 09:13 PM
Hey, guys. I know that quite a few people here are suffering from the infamous "No.015" connection error. I recently posted about encountering it myself, much to my frustration. I've overcome it, though, and I'm going to describe the solution. I believe this -should- apply to everyone who is on broadband. Someone once posted an XBox connection guide, which is excellent if you have no problems, but it does not help you remedy this specific issue.
This post is assuming you have some rudimentary networking knowledge, nothing major. If you are dealing with a router, as I am, this information should solve your problem. And if you have configured said router successfully and your computers connect to the 'net fine (but your GC does not), you should not have any trouble understanding this. Groovy? Let's go.
First, turn on the primary computer you use to access your router. Get into your router's setup screen.
In your router's setup, do you see an area which tells you what your IP addresses will start with? It will normally be something like "192.168.1.1." (It does not have to be this IP exactly, but it will be similar.) You will know this is the correct number if each of your networked computers connect to the 'net with something like it, such as 192.168.1.2, 192.168.1.3, and so on for each consecutive computer. Remember this generic IP for later. Write it down if you have to. You are going to need it when you set up your GC. Now, check to see what the Subnet Mask is. Also save the Subnet Mask information for later. Finally, check to see what the gateway IP is, and also save that for later.
In your router's setup, make sure that it is set to act as a DHCP server. Also, if you can, make sure that your router is set up to accept connections from every device you have connected to it -- all of your computers and the GameCube. Save your changes, if any, and do whatever your router requires for the changes to "settle" with your computer. (I have a LinkSys, and they recommend restarting the modem, and the computer.)
After making sure that your internet connection still works fine, go power up your GameCube and hook up its broadband connection. At the PSO title screen, select "Options," then "Network Option," then "Provider Option." Naturally, hit "OK" when it prompts you. Use existing network data if you have it, or make a new file if necessary.
Hit "Network Setup." Click on the connection name you want to modify and/or create. Hit "Edit Menu," name it as you wish, then hit "Next." Select "Manually Set An IP Address." Although we are going for a DHCP connection, you still will get one, but you need to do this to get the error to go away. Beneath that, select whatever disconnect option you want, it doesn't matter. Then hit "Next."
On this screen, you have to input an IP address, subnet mask, and default gateway. This is where the information you acquired earlier comes into play. For the IP address, count how many devices you have networked to the router. If there are five devices total, and your GC is the fifth, give your GC the fifth possible IP. Using the example above, this would be 192.168.1.5. Do not worry that every other computer on the network is (probably) set up to detect the IP automatically. Just keep going. Type in the Subnet Mask in the next field just as it was on your router. Then enter the Default Gateway info the same way it was on your router. Leave the DNS fields blank. Hit "Next." Leave the Proxy fields blank. Hit "Next" again.
Save and you're done. Try to connect. Good luck.
If it doesn't work for you, I sincerely apologize, but I can't help you further. This, however, was my solution.
This post is assuming you have some rudimentary networking knowledge, nothing major. If you are dealing with a router, as I am, this information should solve your problem. And if you have configured said router successfully and your computers connect to the 'net fine (but your GC does not), you should not have any trouble understanding this. Groovy? Let's go.
First, turn on the primary computer you use to access your router. Get into your router's setup screen.
In your router's setup, do you see an area which tells you what your IP addresses will start with? It will normally be something like "192.168.1.1." (It does not have to be this IP exactly, but it will be similar.) You will know this is the correct number if each of your networked computers connect to the 'net with something like it, such as 192.168.1.2, 192.168.1.3, and so on for each consecutive computer. Remember this generic IP for later. Write it down if you have to. You are going to need it when you set up your GC. Now, check to see what the Subnet Mask is. Also save the Subnet Mask information for later. Finally, check to see what the gateway IP is, and also save that for later.
In your router's setup, make sure that it is set to act as a DHCP server. Also, if you can, make sure that your router is set up to accept connections from every device you have connected to it -- all of your computers and the GameCube. Save your changes, if any, and do whatever your router requires for the changes to "settle" with your computer. (I have a LinkSys, and they recommend restarting the modem, and the computer.)
After making sure that your internet connection still works fine, go power up your GameCube and hook up its broadband connection. At the PSO title screen, select "Options," then "Network Option," then "Provider Option." Naturally, hit "OK" when it prompts you. Use existing network data if you have it, or make a new file if necessary.
Hit "Network Setup." Click on the connection name you want to modify and/or create. Hit "Edit Menu," name it as you wish, then hit "Next." Select "Manually Set An IP Address." Although we are going for a DHCP connection, you still will get one, but you need to do this to get the error to go away. Beneath that, select whatever disconnect option you want, it doesn't matter. Then hit "Next."
On this screen, you have to input an IP address, subnet mask, and default gateway. This is where the information you acquired earlier comes into play. For the IP address, count how many devices you have networked to the router. If there are five devices total, and your GC is the fifth, give your GC the fifth possible IP. Using the example above, this would be 192.168.1.5. Do not worry that every other computer on the network is (probably) set up to detect the IP automatically. Just keep going. Type in the Subnet Mask in the next field just as it was on your router. Then enter the Default Gateway info the same way it was on your router. Leave the DNS fields blank. Hit "Next." Leave the Proxy fields blank. Hit "Next" again.
Save and you're done. Try to connect. Good luck.
If it doesn't work for you, I sincerely apologize, but I can't help you further. This, however, was my solution.