This fix my problem, ty @Variant o/
my .bat is:
cd "C:\SEGA\PHANTASYSTARONLINE2\pso2_bin"
SET -pso2=+0x01e3f1e9
start pso2.exe +0x33aca2b9 -pso2
only seek the fodder pso2_bin and copy the route.
This fix my problem, ty @Variant o/
my .bat is:
cd "C:\SEGA\PHANTASYSTARONLINE2\pso2_bin"
SET -pso2=+0x01e3f1e9
start pso2.exe +0x33aca2b9 -pso2
only seek the fodder pso2_bin and copy the route.
Last edited by Ahri; Jan 19, 2016 at 02:43 AM.
still nothing
Does this workfor windows 8?
This is for those slightly confused by Variant's instruction, hopefully it will further clarify his solution provided.
Open up notepad
Next, locate your pso2 install, and find pso2.exe
My pso directory where pso2.exe is: D:\Phantasy_Star\PHANTASYSTARONLINE2\pso2_bin <-- your directory will not be the same as mine.
The tricky part is that, you may not have PSO installed on your default drive (usually C:\) So if it isn't you will need to place another line BELOW the cd line. This line will be the letter drive you need to run the command from. In my case it is D:
So the altered code for the .bat file that you need to type into notepad (using MY DIRECTORY IS:
Code:cd "D:\Phantasy_Star\PHANTASYSTARONLINE2\pso2_bin" D: SET -pso2=+0x01e3f1e9 start pso2.exe +0x33aca2b9 -pso2
To reiterate
First line is where my pso2.exe is located.
2nd line is the drive it's located on
then hit save, name it (name).bat , change the "save as file type" to "all files" save it anywhere. Then right click the file, Select Run as Administrator. And it will launch PSO2.
My artwork:https://www.artstation.com/facelessproject
everything works fine here so far. no kick. just needed to delete the tweaker.
but im missing the item translation. is there already a solution for it or should i just wait and check later again?
I can confirm that this one works for those who didn't installed their PSO2 on C drive.
Also, will see whether I would get another NP1013 error even with this method (which it could happened again, but fixing it are a lot easier if you got the .bat file done already. Just re-copy the ddata file).
Props to Variant (and FacelessRed) for the solution.
And hopefully the official fix from the Tweaker would arrive.
Last edited by Zeroem; Jan 19, 2016 at 09:26 AM. Reason: updating status
cd "C:\Program Files (x86)\SEGA\PHANTASYSTARONLINE2\pso2_bin"
SET -pso2=+0x01e3f1e9
start pso2launcher.exe +0x33aca2b9 -pso2
I'm getting "Server Connection timed out"
Connect With Us