Hello,
Just giving back to the community this time.
To play PSU via xbox v1 controller series you will need to do the following:
Obtain a xbox to pc usb adapter here is list from eBay.
Download and install XBCD driver download
Download my XBCD PSU config file config file
Extract the config file to the XBCD installation directory (Program FilesXBCD).
Launch XBCD, open, select file and apply. Exit XBCD, disconnect USB cable and reconnect (for settings to apply). Here is a screenshot after the xbcd config file has been applied.
Play PSU!! This will give you the same button layout that the xbox 360 uses.
In PSU there are 2 config options you can change, go start button (open menu) > System > Options > you can turn on Vibration and set Controller to controller.
If you have messed around with the button config previously in PSU main launch screen (where you can modify video settings) please reset gamepad settings to default.
-HR
PS, this is for the xbox version 1 controllers, I don't have a xbox360 wired controller to test this config file with.
<font size=-1>[ This Message was edited by: HolyRoses on 2006-11-02 10:28 ]</font>
<font size=-1>[ This Message was edited by: HolyRoses on 2006-11-02 10:29 ]</font>
<font size=-1>[ This Message was edited by: HolyRoses on 2006-11-02 10:30 ]</font>
<font size=-1>[ This Message was edited by: HolyRoses on 2006-11-02 10:31 ]</font>
Connect With Us