So, I know that there are alot of you that use the Xbox 360 controller for PSU-PC, and I do too.
Have you noticed that you cannot use the trigger buttons, and you can't map anything to the guide button (the green glowy button in the middle).
I'm currently using the modified XBCD drivers that include support for the 360 controller, obtainable here: http://xbcd360guide.50webs.com/, which also provides a very helpful guide as to how to get the drivers set up and working.
Anyway, my concern is two fold:
a: I want the trigger buttons to work, and perhaps the guide button. In the XBCD config tool, it considers each trigger as an Axis, as opposed to a button.
b: I don't want to have to use my goddamn keyboard to access my mission reward! Is there any way, using XBCD, or some other third party program, possibly some type of controller-keyboard emulator (somewhat like Gravis's software) that will allow me to bind the Z key function to a trigger or the guide button on this controller? Most of the time that I play, I'm soloing, so I don't need to type at all. I want to sit back from my computer or lay on my bed to play PSU, not sit in my computer char for hours on end .
Thanks to anyone that provides useful insight .
EDIT:
- Perhaps I should have specified in the original post that I've tried with both the original drivers made by Microsoft, as well as the XBCD drivers. I've actually reverted back to Microsoft's drivers anyway, but the trigger/rudder buttons still cannot be bound to anything in PSU's gamepad configuration.
- The Microsoft drivers I'm referring to came on a CD with the controller when I got it (it was packaged as "Xbox 360 controller for Windows"). The Microsoft drivers are linked in a later reply to this thread, however I reiterate that I still cannot use the triggers for PSU.
<font size=-1>[ This Message was edited by: Wang_Tang on 2006-11-20 09:11 ]</font>
Connect With Us