Lynx made a VERY great version of the cards. His DeviantArt has all the cards, plus several of the rule packs.
As for a logo, do you need just PSO or PSOep3?
Lynx made a VERY great version of the cards. His DeviantArt has all the cards, plus several of the rule packs.
As for a logo, do you need just PSO or PSOep3?
With some editing, it can be taken from this
Ok, I have another question. How does Arkz summoning placement work in the game? I never paid very much attention to it while playing, because I would just place in the squares the game would allow me to, but how it is determined on how far out a creature can be summoned? It don't remember it being row based, like the guide from Lynx's project states, but maybe that's the easiest determine it?
High cost monsters generally can only be placed on the rear rows, while low cost monsters can be played much further up the field - I'd need to double-check to see the exact distances allowed though.
Hey all, glad to see my work is still being used and liked.
Neike, I spent quite some time trying to work out monster placements before I finally settled on the system I have. I'm not entirely sure its 100% accurate but there were a number of things I noticed about certain stages that led me to the current workings. As far as I can tell its the easiest way of working things out.
Hi all! This is fantastic to see! Was just wondering if anyone has thought to work on a digital revival of the game as well. Thanks!
I tried to get these professionally printed as trading cards and some problems came up.
1. ISSUE: Your submitted file(s) are low resolution (lower than 300 dpi)
This may cause your print product to appear fuzzy and pixelated. You will need to re-design your file(s) at 300-350 DPI (dots per inches).
2. ISSUE: The text and/or design objects are too close to the edge and is at risk of being trimmed off. In order to prevent the text in your artwork from being cut off, all text must be an 1/8th (0.125") inches from the finished edge of your layout.
3. ISSUE: Your file(s) do not display a proper bleed. All bleeds should be 1/4 of an inch (0.25") all around and an 1/8th of an inch on each side (.125").
they can't be printed until they meet all of these requirements.
do you think you can fix them LynxSarnage?
I was going to get them printed through printfirm
http://www.printfirm.com/trading-card-printing.html
"Thol-Falz, tes par rel diemed. Tes syr, weh yi ryukad te reli, rel ken rel obid." Dark Force, your shrine is finished. Your sword, who you returned to reality, is able to be wielded.
Connect With Us