Page 10 of 51 FirstFirst ... 7891011121320 ... LastLast
Results 91 to 100 of 509
  1. #91

    Default

    Quote Originally Posted by zombiemoshpit84 View Post
    http://www.mediafire.com/?sb1l9ivsac6s60z i hope i got it right this time sorry if its wrong.
    http://www.mediafire.com/?wd5e7fh1055xf7n ._.
    When requesting save conversions:
    1) Archive the save file folder (PSP\SAVEDATA\NPJH50043 or ULUS10529 or ULES01439 for JP/US/EU respectively)
    2) Upload to a free file host (MF, MU, etc). File should only be about 500KB+.
    3) State the conversion you want (US>JP or EU>JP, etc)

  2. #92

    Default

    thanks alot! i put the file back on my psp and it says its corrupted data. im guessing thats alright since the DLC was the same way right?

  3. #93

    Default

    Quote Originally Posted by zombiemoshpit84 View Post
    thanks alot! i put the file back on my psp and it says its corrupted data. im guessing thats alright since the DLC was the same way right?
    Umm, the file should go into your "\PSP\SAVEDATA" folder. As in, "\PSP\SAVEDATA\NPJH50043", and you'd be able to view this save data on your PSP.
    When requesting save conversions:
    1) Archive the save file folder (PSP\SAVEDATA\NPJH50043 or ULUS10529 or ULES01439 for JP/US/EU respectively)
    2) Upload to a free file host (MF, MU, etc). File should only be about 500KB+.
    3) State the conversion you want (US>JP or EU>JP, etc)

  4. #94

    Default

    yeah im probably not dropping the file correctly back into my psp.

  5. #95

    Default

    iv tried naming the folder NPJH50043 ULUS10529 and ULES01439. and it always shows up as corrupt. whats else can i try? did i mention its US to JP not EU to JP? my bad for giving you so much trouble

  6. #96

    Default

    Quote Originally Posted by zombiemoshpit84 View Post
    iv tried naming the folder NPJH50043 ULUS10529 and ULES01439. and it always shows up as corrupt. whats else can i try? did i mention its US to JP not EU to JP? my bad for giving you so much trouble
    Yep, I did a US>JP conversion. Just tested the save file on my side too and it loads fine on PSPo2 JP.

    Try to double-check if you've placed the files in the correct place.
    Spoiler!

    Your drive letter (the "G" in the picture) may be different, but everything else after that must be the same.
    When requesting save conversions:
    1) Archive the save file folder (PSP\SAVEDATA\NPJH50043 or ULUS10529 or ULES01439 for JP/US/EU respectively)
    2) Upload to a free file host (MF, MU, etc). File should only be about 500KB+.
    3) State the conversion you want (US>JP or EU>JP, etc)

  7. #97

    Default

    http://www.mediafire.com/?v7pq54xkykqzhib i sent this to you from a mac maybe thats why i cant get it to work. i fired up the PC maybe we can try again? if i fail this time i wont bother you again . sorry...

  8. #98

    Default

    Quote Originally Posted by zombiemoshpit84 View Post
    http://www.mediafire.com/?v7pq54xkykqzhib i sent this to you from a mac maybe thats why i cant get it to work. i fired up the PC maybe we can try again? if i fail this time i wont bother you again . sorry...
    Meh if you were bothering me I would've just not replied from the start :D
    http://www.mediafire.com/?c4z015384ba559b Good luck ._.
    When requesting save conversions:
    1) Archive the save file folder (PSP\SAVEDATA\NPJH50043 or ULUS10529 or ULES01439 for JP/US/EU respectively)
    2) Upload to a free file host (MF, MU, etc). File should only be about 500KB+.
    3) State the conversion you want (US>JP or EU>JP, etc)

  9. #99

    Default

    Quote Originally Posted by Mikazuki View Post
    Meh if you were bothering me I would've just not replied from the start
    http://www.mediafire.com/?c4z015384ba559b Good luck ._.
    i cant figure out what im doing wrong. if the file works on your end but not on mine then im messing this up big time. i went to "SAVE DATA" created a NPJH50043 file and dropped the file you sent me into it, its just not working... its not loading up as if i were to drop the original file and showing up as corrupt on my psp. im not ready to give up yet. i spent 350 hours on my data and ill take any advice anyone out there can give me. thank you Mikazuki.

  10. #100

    Default

    Mmm if you have a copy of PSPo2 JP you could try and see if the game is able to load the save file.

    If you have PSPo2I, even better. Try to import that save file into PSPo2I directly ._.
    When requesting save conversions:
    1) Archive the save file folder (PSP\SAVEDATA\NPJH50043 or ULUS10529 or ULES01439 for JP/US/EU respectively)
    2) Upload to a free file host (MF, MU, etc). File should only be about 500KB+.
    3) State the conversion you want (US>JP or EU>JP, etc)

Similar Threads

  1. PSP2 Save Conversion?
    By Ray and Pele in forum Phantasy Star Portable
    Replies: 102
    Last Post: Oct 22, 2011, 12:37 PM
  2. PSP2 Save conversion US -> Jap
    By Ghostcat in forum Phantasy Star Portable
    Replies: 0
    Last Post: Jun 26, 2011, 10:57 PM
  3. PSP2 JP Free Items & Save conversion
    By TheAstarion in forum Phantasy Star Portable
    Replies: 9
    Last Post: Jan 11, 2011, 05:33 AM
  4. Save Conversion - US / EU to JP
    By Jazhara in forum Cheaters (Closed)
    Replies: 3
    Last Post: Sep 7, 2003, 04:32 AM
  5. Ver1 to Ver2 Save Conversion - HELP !
    By N21 in forum Tech Support
    Replies: 4
    Last Post: Jun 21, 2002, 11:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •